Return to Pattern Library
Analog
Sample an analog input
Requires the Temboo extension.
Platform

TI SimpleLink

Open in VS Code You can also find Device Loop Patterns in CCS. Search Temboo: Browse Device Loop Patterns in the command palette.
Configure an ADC channel and produce stable, plausible samples from an analog input.
Applies when
Use when bringing up analog sensors, battery/voltage measurements, potentiometers, or other ADC-based inputs in a TI SimpleLink project.
Show pattern details
Hide pattern details
Intent
Inspect the target and project configuration, select an available analog input, acquire a configurable sequence of ADC samples, and report raw values plus converted voltage when the platform configuration supports a trustworthy conversion.
Expectation
Samples are acquired without driver errors, remain stable for a steady input, and change in the expected direction when the input voltage is deliberately changed.
Success criteria
The requested number of samples is collected without ADC/driver errors. A steady input produces reasonably stable readings, and a deliberate input change produces a clear corresponding change in the sampled value.
How it is verified
Capture a sequence of timestamped samples with the input held steady, then deliberately change the input when practical and confirm a corresponding change. Compare against an independently measured or known voltage when available, but do not fail a raw-code test solely because a calibrated voltage is unavailable.